How to jailbreak iOS 11.2-11.3.1 with Electra Tool

You will likely already know that the latest version of the Electra jailbreak is now out, which offers liberation for Apple’s device running firmware up to version iOS 11.3.1. If you want to jailbreak your 64-bit compatible iPhone or iPad using Electra, then here’s a tutorial to that effect.

Before proceeding, it’s worth noting that this is a semi-untethered solution, which means that the Electra app will need to be opened and the device re-jailbroken each time it is rebooted or powered down.

In this tutorial, we’ll show you how to jailbreak iOS 11.2-11.3.1 using Electra1131. When you’re ready to move forward with the jailbreak process, simply follow these steps:


– You will need to be using a 64-bit iPhone or iPad which supports and has a compatible version of iOS installed. Electra supports iOS 11.2 to iOS 11.3.1 (including betas) on all iPhone, iPad and iPod touch devices, including iPhone X.
– The latest version of Cydia Impactor for your PC or Mac, obtained from
– The latest version of iTunes.
– A PC or Mac running Windows or macOS.
– A free or full paid version of Apple Developer ID. You can get one from using an existing or new Apple account.
– The latest Electra1131 final IPA file, which you can get from here. As mentioned in that post, there are two versions of Electra available, one which requires paid developer account while the other one doesn’t and can be used with free Apple ID account. The difference between the two is the exploit being used, with dev account one using multipath tcp exploit and having much higher success rate when jailbreaking compared to free developer account variant which uses vfs exploit. Apart from this difference, everything else about the two versions of Electra jailbreaks is same. We recommend going with non-dev version for most users.

The How-To Jailbreak Process

Step 1: Take the iOS 11.3.1 device in question and connect it to your PC or Mac via the supplied USB cable. Make sure that you capture a full backup of that device via iTunes before you continue. This is good housekeeping and makes sure that your data is protected.

Step 2: It is recommended that you enable Airplane Mode, disable Siri, and reboot your device before running Electra on it.

Step 3: If you read the “Pre-Reqs” above, then you should have the latest version of Cydia Impactor by now. Launch the app and drag the Electra1131 IPA file of your choice into the Cydia Impactor interface. When requested, add your Apple ID credentials and wait for Cydia Impactor to go through the necessary process of sideloading the Electra IPA to your device.

Step 4: Once the Electra jailbreak app is sideloaded, you need to make sure that it can be launched on the device. To do this, on the device itself, navigate to Settings > General > Profile(s) & Device Management and find the profile associated with the Electra IPA that you just sideloaded. Select Trust and then Trust again on the resulting alert. You can now head back to the Home screen where the Electra app icon is resting and tap on it to launch it.

Step 5: Electra will launch like any other app and provide you with its main interface. You should notice a button titled Jailbreak in the middle of the screen. Tap this button to begin the process, and also make sure that the ‘Tweaks’ toggle is set to the On position.

Step 6: After a short while, you will notice Electra rebooting/respringing the device automatically. This is normal. Once it comes back to the Lock screen, unlock the device, launch Electra again and hit “Jailbreak” again to continue the jailbreaking process.

Step 7: Allow Electra to go about its business and do all of the heavy liftings that you need it to do. Once the process has completed, you should be notified that you have successfully jailbroken the device, and should also have Cydia icon on the Home screen.

10) After respringing, you should find Cydia on your Home screen. start enjoying the jailbreak!

Note: If you don’t see Cydia after jailbreaking with Electra1131, then re-launch the Electra jailbreak app and keep trying until it does (it took me 2 tries).

And that’s all there is to it; you’ve successfully jailbroken your iOS 11.2-11.3.1 device! Have you tried Electra1131 on your device yet? Share in the comments section below.


  1. Had to restart my device at least 100 times lol. As I was about to give up, while sitting on the shitter, Electra didn’t notify me of error exploit and I saw indication that Cydia was installing. I said oh thank you little baby jesus! Phew! I did feel part of me was empty a bit going without a jailbreak for just about 6 months. Unsure what it is that put me down below where my poop is floating around but I feel much better now.

    • Glad to hear, happy that you are jailbroken bro, i now that feeling 😉
      me it work from the first try, on iPhone 6s, but on iPhone 6 its work after 6 or 7 try .. i think its because Coolstar start testing on an iPhone 6s, before he get donations to buy iPhone X.
      anyway, its great that we can enjoy an other jailbreak again , cheeeeers

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.